Analog Devices ADuCRF101 Wireless Data Acquisition System Now at Mouser

Mouser Electronics, Inc. is now stocking the ADuCRF101 Precision Analog Microcontroller with RF Transceiver from Analog Devices. The ADuCRF101 is a fully integrated data acquisition system-on-a-chip designed for low power wireless applications. It features a 6-channel 12-bit analog to digital converter (ADC) built around a 16MHz ARM Cortex-M3 core, as well as a complete wireless RF transceiver. On-chip memory includes 128KBytes of Flash part of which can be partitioned to be used like EEPROM, and 16KBytes of SRAM, all in a package just 9mm x 9mm. This new microcontroller targets Internet of Things as well as smart meters, home automation, process and building control, wireless mesh networks, and the latest IEEE 802.15 Smart Utility Networks (SUN) applications.

The Analog Devices ADuCRF101 Precision Analog Microcontroller with RF Transceiver, available from Mouser Electronics, contains everything needed to implement a wireless data acquisition system, including analog and digital sensor inputs and an RF transceiver. The data acquisition section consists of a high resolution 12-bit ADC with a programmable data rate of up to 167kSPS. The ADC has six channels which can be configured in either single ended or differential modes. In single-ended mode, the ADC can be used with sensors that have ratiometric outputs, such as transducers. Serial inputs include a UART, I2C, and SPI which can be used to interface to external sensors.

The on-chip RF transceiver operates over two frequency bands, 862MHz to 928MHz and 431MHz to 464MHz, covering the worldwide license-free ISM bands at 433 MHz, 868 MHz, and 915 MHz. It is suitable for applications that operate under the European ETSI EN300-220, the North American FCC (Part 15), and the Chinese short-range wireless regulatory standards. The RF transceiver section supports ZigBee as well as custom wireless protocols. This high degree of integration significantly lowers Bill-of-Materials (BOM) costs.

This wireless data acquisition system is designed for battery-powered applications where low power is absolutely critical. The ADuCRF101 can be configured to operate under different low power modes under direct program control. A Flexi mode is available, which allows any peripheral to wake up the device. Hibernate mode allows only the internal wake-up timer to remain active. Shutdown mode is the lowest power mode and only an external interrupt can wake up the microcontroller.

To learn more, visit:
http://www.mouser.com/new/Analog-Devices/adi-aducrf101-microcontroller  

Mouser Electronics, Inc.
1000 N. Main Street
Mansfield, TX 76063, USA
http://www.mouser.com
(817)804-3800

Suggested Articles

Interest growing in Rome chips used in data center and supercomputing space

Maxim Integrated Products, Inc., reported net revenue of $551 million for its second quarter of fiscal 2020, up 3% from the previous quarter.

Old definitions of processors are beginning to blur with AI, IHS Markit analyst says