Hall Effect Sensors from Allegro MicroSystems

Hall Effect Sensors from Allegro MicroSystems
Allegro MicroSystems Inc.
The A1391/2 and A1393/5 from Allegro MicroSystems Inc., Worcester, MA, are analog-output, linear Hall effect sensors that operate down to 2.5 V, include a sleep enable pin, and have high impedance outputs while in sleep mode. You can configure power consumption by modulating when the device is active (~4 mA current draw) and sleeping (~25 µA). During sleep mode, output is not valid, high impedance, letting you connect the outputs from multiple devices to a single ADC. The A1391/2 sensors have 1.25 mV/G and 2.50 mV/G gain, respectively, while the A1393/5 have 5.00 mV/G and 10.0 mV/G gains.

Contact Info

Company: Allegro MicroSystems Inc.
Country: United States (USA)
Phone number: 508-853-5000
Fax: 508-853-7895

Suggested Articles

Samsung Electronics Co., Ltd., has added several software enhancements to its PCIe Gen4 solid state drive (SSD) series, improving SSD performance.

New Western Digital cards are built on 3D NAND

OmniVision's new OX01F10 SoC module provides automotive designers with a small form factor with low-light performance, ultra-low power and reduced cost.