WirelessHART Adapter from MACTek, Moore

Click for larger image
MACTek Corp.

The BULLET WirelessHART adapter from MACTek Corp., Gates Mills, OH, supplied by Moore Industries-International Inc., North Hills, CA, enables existing wired HART field devices to communicate with host applications using WirelessHART. The adapter can be used with both analog and HART-enabled devices and is wired directly to a standard HART field device or connected anywhere on the 4–20 mA loop. A wired HART field device retrofitted with the BULLET communicates its analog process variable over the existing wiring to the existing DCS; the BULLET simultaneously communicates with the digital PV and device diagnostic information over the WirelessHART network. Applied to an analog-only device, the BULLET transmits a digital representation of the 4–20 mA PV to the control room over the WirelessHART network. (Moore: 818-894-7111, fax 818-891-2816, [email protected], www.miinet.com)

Contact Info

Company: MACTek Corp.
Country: United States (USA)
Phone number: 609-801-0039

Suggested Articles

New sensors use the changing shape of nanowire combined with a piezoelectric material to produce enough energy to power the sensor.

With the EU decision to back 5G, chipmakers Intel and Qualcomm are poised to benefit.

Conductive textiles can be incorporated into clothing, allowing multiple wearable sensors to be interconnected with a low power system that is reliable and…