Strain Gage Input Module Packs High-Level Signal Conditioning

Strain Gage Input Module Packs High-Level Signal Conditioning
Dataforth Corp.

The MAQ20-BRDG1 strain gage input module provides four channels of strain gage input in a compact module that can interface to quarter, half, or full-bridge sensors using either a four- or six-wire connection. It interfaces to transducers with a nominal resistance of 100Ω to 1 kΩ and provides 1.5-kVrms of input-to-bus isolation. Signal range, bridge excitation voltage, and sample rate are user-configurable. Signal bandwidth scales automatically with sample rate. Internal precision shunt calibration resistors and a zero-balance feature compensate for sensor inaccuracy, and internal bridge completion resistors are built-in for use with half-bridge and quarter bridge sensors. A datasheet is available at http://www.dataforth.com/catalog/pdf/MAQ20_AnalogInput_StrainGage.pdf  

Dataforth Corp.
Tucson, AZ
800-444-7644
520-741-1404
[email protected]
http://www.dataforth.com

Contact Info

Company: Dataforth Corp.
Country: United States (USA)
Phone number: 800-444-7644
Fax: 520-741-0762

Suggested Articles

Hydrogen refueling stations are limited in the U.S., restricting interest in use of fuel cell electric cars


Silicon Labs is providing the BT module needed for detecting proximity with another Maggy device

Test automation won't fix everything, but can help, according to an automation engineer. Here are five problems to avoi to improve chances of success