New USB Counter / Timer DAQ Devices from Measurement Computing

New USB Counter / Timer DAQ Devices from Measurement Computing
Measurement Computing Corp.

NORTON, MA -- Measurement Computing Corporation announces the release of two high-speed USB Counter / Timer DAQ devices available with four or eight counter I/O.

The USB-CTR Series feature high-speed pulse counting with a 48 MHz maximum input frequency. Resolution is programmable up to 64-bits, with an aggregate scan rate of 8 MB/sec.

These new devices offer some of the most advanced counter / timer functionality available in USB DAQ today. Supported high-level input modes include totalize, period measurement, pulse-width measurement, and timing measurement. Four independent PWM timer outputs and 8 digital I/O are also provided. Timer output channels can operate continuously or for a specified pulse count, with duty cycle and period changeable on-the-fly. Counter and digital channels can also be scanned synchronously. Flexible edge, level, direction, and debounce settings allow the counters to better adapt to user signals.

USB-CTR Series features:
• 4 or 8 counter I/O
• 48 MHz maximum input frequency
• Programmable resolution up to 64-bits per counter
• Aggregate scan rate of 8 MB/s
• Supports the following counter input modes: ◦Totalize
• Period measurements
• Pulse-width measurements
• Timing measurements
• Debounce filter circuitry
• Four PWM timers
• Eight digital I/O
• Synchronous high-speed reads of digital and counter inputs

Software options include comprehensive support for Visual Studio and Visual Studio .NET, DASYLab, and NI LabVIEW™.

The four channel USB-CTR04 is priced at $359, and the eight channel USB-CTR08 is priced at only $429.

For more information, visit http://www.mccdaq.com
 

Contact Info

Company: Measurement Computing Corp.
Country: United States (USA)
Phone number: 508-946-1000
Fax: 508-946-9500

Suggested Articles

IP theft and technology transfer are key components of eight-part deal

According to a Gartner report, global semiconductor revenue totaled $418.3 billion in 2019, down 11.9% from 2018.

3D printed prosthetic arm has Arm M4 processor inside on board built by Particle