The HAL-TL-5X10W-C-PA Class 1 Division 2 hazardous location LED signal stack light comes equipped with a 110-dBA horn and is approved for use in hazardous environments where explosive and flammable gases, vapors, and dusts may occasionally be present. The light is designed for routing traffic in industrial refueling stations and processing status indications in manufacturing facilities. It employs five 10W LED lamps, producing an amber, red, blue, green, and white light output. The lights can be configured to operate on a steady burn, a strobe, or a steady burn and strobe combination. Each LED lamp offers 1,050 lumens of light output and the audible alarm setup sounds a unique tone per user setting. Wiring is made through a ¾” NPT conduit access hub and can be configured to work on 120 Vac or 240 Vac for use with standard line voltages or 24 Vdc. A NEMA 4X rated explosion proof junction box protects the internal wiring and can be tapped in order to connect this stack light to power sources. Mounting is provided by a heavy gauge aluminum base with predrilled holes. A datasheet is available at http://www.larsonelectronics.com/images/product/specsheet/144171.pdf
Larson Electronics
Kemp, TX
800-369-6671
903-498-3363
[email protected]
http://www.larsonelectronics.com
Contact Info