Micropelt Infinite Wireless Power Supply Field-Tested

FREIBURG, Germany--(BUSINESS WIRE)--Micropelt, an innovator in thermal energy harvesting technology, has collaborated with Royal Dutch Shell to prove the concept of converting waste heat into a sustainable, maintenance-free power supply for wireless sensor devices. Shell sees wireless sensor networks as a strong contributor to increasing productivity and lowering maintenance costs through better status information. The concept of energy harvesting eliminates the need for primary batteries in many wireless sensors. Deployment in restricted access or even explosive areas, and those previously considered too costly, become commercially viable if both wiring and battery maintenance can be eliminated.

"The benefit for both existing and new production sites will be invaluable due to substantial cost savings along with largely increased operational flexibility and process optimization."

Shell's team, led by Don Mulder, who is responsible for development and implementation of energy saving new technologies, combined a Micropelt TE-Power PROBE Thermoharvester with an IPS thin-film battery to create a buffered perpetual power source for a prototype Rosemount wireless pressure transmitter running WirelessHART, an industrial mesh networking protocol. Don summarizes Shell's field trial, "We assembled the thermoharvester, energy buffer and wireless transmitter in an explosion-proof manner. In our factory in Den Helder we mounted the thermoharvester to a hot water pipe of 75°C (167°F) and the wireless transmitter some feet away. This took less than an hour. The set-up worked flawlessly for the couple of weeks we had it out in the field, transmitting data once per minute to the associated Emerson wireless gateway. We are very pleased with both the easy set-up and reliable function of this novel energy source."

The TE-Power PROBE thermoharvester replaces a primary battery pack of more than 16 amp hours capacity, designed for 5 to 10 years of life. One version of the TE-Power PROBE supports attachment to a heat source via a 1/4 in. thread, while the other features a straight copper pin that inserts into a 15 mm T-joint to harvest more efficiently from hot fluids. A temperature gradient of 20°C (36°F) produces 1 mW of harvested power, equivalent to three 2,000 mAh AA cells annually in a 3 V system. A 65°C gradient (117°F) leads to 10 times more energy, providing an annual budget of 30 AA cells. "We sincerely hope the instrumentation industry will soon start offering products which integrate Micropelt's energy harvesting technology," comments Shell's Mulder. "The benefit for both existing and new production sites will be invaluable due to substantial cost savings along with largely increased operational flexibility and process optimization."

About Micropelt
Micropelt GmbH develops and markets the world's smallest and most effective thermoelectric elements. A world leading position has been achieved in clean-tech energy harvesting (energy scavenging). Other markets addressed include thermal sensing, cycling and cooling. Standard chip-like products are available from a pilot-production plant at the company's headquarters in Freiburg, Germany. Volume production, leveraging Micropelt's highly scalable proprietary processes, is scheduled to start in Q3.2010, raising production capacity to some 10 million devices per year.

Micropelt thermogenerators (TEGs) feature an intrinsic voltage-boost effect based on a high resolution thermoelectric microstructure. This makes TEGs as small as 12 mm2 suitable to drive wireless devices which consume major battery sets over a maintenance period. The smallest standard TEG has a footprint of 6 mm2, making it an ideal candidate for compact integral wireless and batteryless designs.

Micropelt markets a range of integral thermoharvesters including a fully functional wireless sensor node (TE-Power NODE) for wireless in-field evaluation, as well as power sources for experimental and industrial use. Target markets include industrial sensing and condition monitoring in all kinds of environments, building automation, HVAC enhanced control, energy saving and metering applications.

Suggested Articles

Silicon Labs is providing the BT module needed for detecting proximity with another Maggy device

Test automation won't fix everything, but can help, according to an automation engineer. Here are five problems to avoi to improve chances of success

Many of Nvidia’s competitors also use Arm designs, and are sure to object to the deal