Medical Supply Delivers High Power, Saves Same

Bicker Elektronik’s BEO-3000M ac/dc switching power supply series is designed for use in medical devices and medical computer systems. The 3 in. x 5 in. open-frame supplies are available with regulated single-output voltages of 12V, 24V, 36V, or 48V, which can be fine tuned in the range of ±5%. In addition, a 5V standby and a 12V fan output are available.

 

The supplies are capable of reliable 24/7 continuous operation and provide an output power of 250W fanless or 300W with 10 CFM airflow. Other features include efficiency up to 94%, a standby power consumption of less than 0.3W, and an operating temperature range of -40°C to +70°C. For international use, the medical switching power supplies have a wide-range input (90 to 264 VAC at 47 to 63 Hz) with active PFC power factor correction. With a high isolation voltage of 6516 VDC between input and output, the BEO-3000M series complies with the medical safety standard 2xMOPP (Means of Patient Protection) and has international medical safety approvals: IEC60601-1:2005+A1:2012 (Edition 3.1), EN60601-1:2006+A1:2013 (Edition 3.1), ANSI/AAMI ES60601-1:2005 (3rd Edition).

Sponsored by Digi-Key

TE Connectivity Horticultural Lighting Solutions Available Now from Digi-Key

TE connector, relay and filter solutions can help create a fine maze network of power-cabling to the lights needed for vertical farming. Their solutions are interchangeable, easy-to-install, and will last for years in variable humidity environments.

 

 Features in a nutshell: 

  • 250W continuous fanless power
  • Very compact design
  • High power density
  • High efficiency up to 94%
  • Adjustable output voltage
  • Remote Sense feature
  • PS On / Off Remote Control
  • Power Good and Power Fail signal
  • +5V standby output
  • Low standby consumption <0.3 W
  • Wide temperature range -40°C to +70°C
  • Suitable for 24/7 continuous operation
  • Long-term availability at least 5 years 

For more specs, checkout the BEO-3000M datasheet.

Suggested Articles

OmniVision Technologies, Inc. is trying to meet camera sensor demand by using 12 in. wafers to produce its latest 2 megapixel image sensor.

PCB layout may seem pretty easy, but doing it well takes a different skill set than design

According to a new study by Fact.MR, the MEMS sensor market will grow at a compound annual growth rate of 9% through 2027, reaching $50 billion.