Materials Harvest Energy From Heat

As per a review in the journal Science and Technology of Advanced Materials, scientists are getting closer to designing thermoelectric materials that can harvest heat from surrounding environments and convert it into electricity to power devices and appliances. Obviously, devices made with these materials could avoid the need to recharge, change, and dispose of batteries, a major plus for the environment.

 

For thermoelectric materials need to be able to hold heat to conduct electricity well. Thermoelectric materials that can work near room temperature and are flexible would be especially advantageous, particularly for use in wearable devices.

Sponsored by Anritsu Company

New VNA technologies enable mmWave broadband testing to 220 GHz, helping researchers and engineers to overcome test challenges and simplify mmWave testing.

Application development in the mmWave frequencies is growing. Broadband testing over hundreds of GHz of bandwidth is subject to repeatability/accuracy deficits, and engineers demand solutions to help overcome challenges and simplify mmWave testing.

 

Three types of conducting materials are being investigated for use in thermoelectric devices:

  1. Inorganic
  2. Organic
  3. Hybrid

 

Inorganic thermoelectric materials efficiently convert heat into electricity but are not very flexible. Researchers are working to overcome this hurdle. For example, a flexible thermoelectric device was fabricated using chromel (90% nickel and 10% chromium) and constantan (55% copper and 45% nickel) layers covered by a flexible sheet made of polyimide and copper. Micro-thermoelectric generators based on inorganic materials have potential applications in environmental and building monitoring, animal tracking, security and surveillance, and medical treatment. They have already been introduced into commercial devices, such as a body-heat-powered watch manufactured by Seiko.

 

Most organic thermoelectric devices involve polymers. Semiconducting polymers conduct electricity and hold heat better than conventional inorganic semiconductors. They are also lighter and less expensive. Unlike rigid inorganic materials, they are flexible and moldable and can be produced in any shape using 3D printers. However, they are less efficient at converting heat into electricity. Researchers are trying to improve the thermoelectric efficiency of polymers by tuning the composition, length and arrangement of their molecules, aiming to increase the electrical conductivity and crystallinity of the final material.

 

Research that aims to combine the advantages of organic and inorganic materials by blending them together is focused on finding optimal compositions and improving the mixing process. For example, embedding organic molecules into inorganic titanium disulfide crystals makes them flexible and reduces their thermal conductivity. This improves the overall thermoelectric performance.

 

The authors conclude that thermoelectric devices can potentially replace traditional batteries in many applications, but a lot of work on improving thermoelectric materials is required for achieving success in this direction. For more details, read the “Thermoelectric materials and applications for energy harvesting power generation” tech paper.

 

For more information about the research, contact:

Professor Xavier Crispin

Laboratory of Organic Electronics

Linkoping University

[email protected]  

Suggested Articles

Standards for airplane ventilation are actually tougher

Coronavirus to cause $70 million reduction in revenues for 2Q

The system works on Shaped Magnetic Field In Resonance technology