Magnetostrictive Float Level Transmitter Employs Fiberglass Stem

Magnetostrictive Float Level Transmitter Employs Fiberglass Stem
Automation Products Group (APG) Inc.

MPX-G series magnetostrictive float level transmitter with fiberglass stem is said to provide accurate and dependable level measurements anywhere a fiberglass stem can go. The fiberglass stem accommodates the same rugged floats as the MPX-R and allows for one or two floats per stem. The MPX-G carries both CSA Class I Division 1 and Class I Division 2 approvals. As with all MPX series probes, the MPX-G has single or dual float 4 mA to 20 mA outputs, or Modbus with new temperature output and lightning protection. MPX-G probes with Modbus output also function as Tank Cloud slave sensors. Features of the MPX-G include:
• Stem length: 4 - 20 feet
• Stem material: 1” Ø isophthalic polyester resin fiberglass
• Accuracy: ±0.05% of full scale
• Resolution: 4 mA to 20 mA: 14 bit DAC; Modbus: 0.04 in. (1 mm)
• NEMA 4X/IP65 rated housing
• CSA Class I Division 1 and Class I Division 2 approvals
• Programmable with RST-6001 or RST-4100 programming modules
• Outputs: Single float 4-20 mA, Dual float 4-20 mA, and Modbus with temperature and lightning protection

A datasheet is available at https://www.apgsensors.com/sites/default/files/datasheets/MPX.pdf  

Automation Products Group Inc.
Logan, UT
888-525-7300
435-753-7300
[email protected]
http://www.apgsensors.com

Contact Info

Company: Automation Products Group (APG) Inc.
Country: United States (USA)
Phone number: 888-525-7300
Fax: 435-753-7490

Suggested Articles

Toyota and its automotive parts supplier DENSO Corporation are launching a joint venture to develop semiconductors for next-generation vehicles.

SoC by Intel is designed to replace bulky instruments in cryogenic refrigeration

Smartglass products to appear in 2021 that include MEMS mirrors, sensors and more