Magnetic Encoder Consumes 3 µA Typical

Magnetic Encoder Consumes 3 µA Typical
iC-Haus GmbH

The iC-TW11 magnetic encoder chip delivers 10-bit angle detection with a sampling rate of 10 Hz and an average current consumption of typically 3 µA. In standby mode between measuring cycles the idle current cuts back to approximately 100 nA. In normal operation iC-TW11 supports sampling rates of 4 kHz with an activated filter and automatic amplifier gain for 10-bit resolution at maximum accuracy. A measuring cycle can be operated either via the SPI interface or via a separate trigger input by an external event. Available in a 4 mm x 4 mm QFN16 package, price is $4.21 each. Further information is available at http://www.ichaus.com/TW11

iC-Haus GmbH
Bodenheim, Germany
+49 (6135) 9292-313
http://www.ichaus.com
 

Contact Info

Company: iC-Haus GmbH
Country: Germany
Phone number: +49 6135-9292-0
Fax: +49 6135-9292-192

Suggested Articles

The system works on Shaped Magnetic Field In Resonance technology

Dialog Semiconductor plc has agreed to acquire Adesto Technologies Corporation, a supplier of custom integrated circuits (ICs) and embedded systems.

Plants in Chinese provinces of Guangdon and Zhejiang opened in early February after holiday, but majority of workers still have not returned to work