Li-Ion Simulation Tool Predicts Cell And Pack Behavior

Sendyne offers CellMod, which it claims is the first Li-Ion battery simulation tool that can predict cell and pack behavior with an accuracy of better than 5% under a wide range of test conditions. The software includes the company’s Pseudo-2D compact physics-based Li-Ion battery cell model coupled with Sendyne’s proprietary dtSolve, a tool that executes several orders of magnitude faster than other commercially available numerical solvers. The software may be used as a standalone tool or can be integrated with other simulation packages for whole system co-simulation via the Functional Mockup Interface (FMI), an open standard supported by all major simulation platforms.

 

CellMod can be adapted to represent any type of Li-Ion cells, from NMC and LMO to LFP and NCA, and all iterations of these cells. To achieve this, only a simple (non-proprietary) set of experimental data on the cell to be modeled is needed. Sendyne’s tool kit, which includes state of the art parameter extraction, then creates a unique CellMod version for a specific cell. All unique CellMod versions are created under NDA.

Free Newsletter

Like this article? Subscribe to FierceSensors!

The sensors industry is constantly changing as innovation runs the market’s trends. FierceSensors subscribers rely on our suite of newsletters as their must-read source for the latest news, developments and analysis impacting their world. Register today to get sensors news and updates delivered right to your inbox.

 

Reduce Design Time and Cost

 

Currently deployed by a Tier-1 U.S. battery maker, CellMod applications include battery cell rapid prototyping. This reduces design time and costs, as each cell design can first be tested using the model. Design makers can utilize the model to select cells and vendors based on how well candidate cells perform in particular applications.

 

Further, CellMod can help reduce cost, a major challenge to large scale battery adoption. The compact nature of the CellMod-dtSolve™ bundle allows it to be embedded on a microcontroller within a Battery Management System (BMS) for real time predictive control. For large-scale battery systems, such as those used by electric vehicles and energy storage systems, multiple instances of the model, equal to the number of cells in the pack, can run simultaneously in real time. Little computing power or memory is required. By replacing the typical empirical models/Kalman filters with a highly accurate model enabling true predicative control, pack safety can be greatly improved and costs due to over-design can be eliminated.

 

Unlike empirical models often used today, CellMod is a true physics-based model. It considers physical processes occurring inside the cells, such as diffusion in solids or, electrolytic solution, reaction kinetics, charge transport, heat transport, etc. Hence CellMod can predict future battery cell behavior with a high degree of accuracy.

 

For more information, visit Sendyne and/or contact the company via email at [email protected].

 

Sendyne Corp.

250 West Broadway

New York, NY 10013

212-966-0600

http://www.sendyne.com

Read more on

Suggested Articles

OmniVision's new OX01F10 SoC module provides automotive designers with a small form factor with low-light performance, ultra-low power and reduced cost.

Several industry leaders have formed a QSFP-DD800 Multi-Source Agreement (MSA) Group to expedite development of high-speed, double-density, quad small form…

NXP Semiconductors N.V. has announced its secure fine ranging chipset, SR100T, to achieve precise positioning performance for next-generation UWB-enabled…