IMI Sensors unleashes several products for use in high temperature applications. First up is the Model 176A02 differential charge pressure sensor for 1200 °F (649 °C) environments that offers a sensitivity of 6.0 pC/psi and a measurement range of 725 psi peak. The sensor includes UHT-12 elements housed in a hazardous area approved Nickel 600 housing with an integral 10 foot MI hardline cable and 7/16-27 2-pin connector. Next, the Models 357D92 and 357D93 single-ended charge accelerometers are suitable for 1200 °F (649 °C) environments. They offer a sensitivity of 2.3 pC/g and a measurement range of ±1000 g peak. Designed with UHT-12™ elements, the sensors have a Nickel 600 housing with an integral 10 foot hardline cable and 10-32 jack connector. Third, the Model EX682A40 DIN-rail differential charge amplifier offers a sensitivity of 10 mV/pC and an input range of ±250 pC. Approved for use in hazardous areas, the model can be used with differential charge pressure or vibration sensors to convert the incoming differential charge signal into a voltage output. Finally are the Models 421A30, 421A31 and 421A3X differential charge amplifiers. Models 421A30 are pre-configured to be used with differential charge pressure sensors and have a sensitivity of 20.6 mV/pC and an input range of ±242 pC. Models 421A31 are pre-configured to be used with differential charge accelerometers with a sensitivity of 10 mV/pC and an input range of ±500 pC. Model 421A3X is a configurable model that can be used with differential charge pressure or vibration sensors. All three models can convert an incoming differential charge signal into a current or voltage output.
IMI Sensors
Depew, NY
800-959-4464
716-684-0003
[email protected]
http://www.imi-sensors.com
Contact Info