Sensirion is offering a protective cover for select humidity sensors in the SHT3x series. The protective cover is an optional polyimide foil directly attached to the top surface of the sensor. It covers the SHT3x’s complete sensing area and thus acts as a reliable shield against pollution during SMT assembly of the sensor and subsequent processes, such as conformal coating or potting. The protective cover is designed to withstand multiple reflow soldering cycles. To enable correct sensor operation, it must be removed after assembly. A flap on the cover extends over the outer dimensions of the sensor package on one side and is designed to allow the cover to be peeled off easily with tweezers. After peeling off, the sensor will operate as specified in the datasheet. For more information, visit http://www.sensirion.com/sht3x
Sensirion AG
Staefa, Switzerland
+41 44 306 40 00
[email protected]
http://www.sensirion.com
Sensirion Inc.
Mr. Michael Karst
2801 Townsgate Road,
Suite 204
CA 91361 Westlake Village
United States
Tel: 805-409-4900
Fax: 805-435-0467
[email protected]
http://www.sensirion.com
Contact Info