Differential Pressure Sensor Monitors Filter Performance

Differential Pressure Sensor Monitors Filter Performance
Kobold Instruments Inc.

The PMP differential pressure sensor controls and measures the differential pressure of low pressure air or non-corrosive gases. It is widely used for monitoring filters by measuring the pressure difference before and after the filter chamber. The need for a cleaning cycle can then be determined by the increased differential pressure which activates the programmable relay. The second relay produces an alarm if the differential pressure continues to increase. The differential pressure is shown on a four-digit display. For remote transmission, a 4 mA to 20 mA output signal is provided. The device is controlled by a microprocessor. Relay, hysteresis, time delay of the relays, and analog output are programmable.

KOBOLD Instruments Inc.
Pittsburgh, PA
800-998-1020
412-788-4890
[email protected]
http://www.koboldusa.com

Contact Info

Company: Kobold Instruments Inc.
Phone number: 800-998-1020

Suggested Articles

Google CEO Sundar Pichai said EU's GDPR could be starting point for AI regulation, but urged countries to cooperate for a standard approach.

Apple's Lighting cable may be phased out, according to an article on the BBC site.

IP theft and technology transfer are key components of eight-part deal