240W DIN Rail Supplies Can Take A Good Beating

TRACO POWER’s TIB 240-EX Family of 240W DIN rail power supplies are designed for harsh environments and hazardous locations with certifications for ATEX II3G and UL HazLoc Class I / Div 2 standards. They feature 24 / 48 Vdc outputs (-2% ~ +17% VADJ Range); high efficiency operation of 95%; 150% peak power for 4 seconds; and packaged in a ruggedized metal enclosure that is EN61373 qualified to the rigorous railway shock and vibration standards.  

Protection circuits include back power immunity, short-circuit / overload protection and a DC OK dry signal contact. DC-OK LED indicators on both the front and side panels with optional side panel mounting enable use in flat panels. The product’s reduced heat dissipation enables a -40°C to +60°C full load operating temperature range (up to +70°C operation with only 20% de-rating).  

Outputs are radio-interference-suppressed to impede radiation at long output lines. This filter reduces the common mode current to within limits of telecommunication ports. The units operate with a high-power factor of up to 99% with active power factor correction which also minimizes input inrush current.  

All models are safety approved to meet UL/EN 60950-1, UL508 listed, EN 600079-0/-7/-15, ATEX II3G and UL HazLoc Class I, Division 2 with EN55032 Class B for both radiated and conducted emissions. For deeper insights, datasheets are available.

Suggested Articles

An accelerometer measures the rate of change of an object’s velocity to monitor its movement.

From cell phones to industrial manufacturing, knowing when an object (or a person!) is nearby is a basic sensing requirement.

Compact and rugged sensors from Balluff monitor temperature of fluids and compressed air.