1W DC/DC Converters Power Remote Sensors

Murata’s NXF1 series 1W, surface-mount (SMT) dc/dc converters are designed for applications requiring tight output regulation. These include powering remote pressure, hall-effect, mass airflow, and other sensors and in markets that include alternative energy/solar power, transportation, telecom/wireless equipment, and medical.


Inputs available are nominal 3.3V and 5V, line regulation is typically better than 0.03%, and load regulation is typically better than 0.5%. All components in the series have continuous short circuit protection with auto re-start or latch-off depending on model and temperature. Input range is ±5% around the nominals of 3.3V and 5V.

Sponsored by Anritsu Company

New VNA technologies enable mmWave broadband testing to 220 GHz, helping researchers and engineers to overcome test challenges and simplify mmWave testing.

Application development in the mmWave frequencies is growing. Broadband testing over hundreds of GHz of bandwidth is subject to repeatability/accuracy deficits, and engineers demand solutions to help overcome challenges and simplify mmWave testing.


Parts are 100% production tested to 3 kVdc and carry agency recognition pending for 'basic' protection at 250 Vrms and 'reinforced' protection at 125 Vrms to UL60950. Medical recognition to ANSI/AAMI ES 60601-1 is also pending for 2 MOOPs (Means Of Operator Protection) and 1 x MOPP (Means Of Patient Protection) at 125 Vrms and 1 MOOP (Means Of Operator Protection) based upon a working voltage of 250  Vrms max, between Primary and Secondary.


Additionally, operating temperature ranges from -40°C to +105°C with derating depending on model. For further information, an NXF1 series datasheet awaits your perusal.

Suggested Articles

Nvidia saw its stock drop by 16% from its high a week ago

AMD and Nvidia saw 6% drop, joining long list of losers

Interconnections supplier Amphenol Corp. has downgraded its Q1 2020 fiscal guidance due to coronavirus effects on its business.